Call NowBook Consultation
Cedar privacy fencing along a residential backyard property line

Fencing & Privacy in Red Deer

Custom fence builders in Red Deer specializing in cedar, composite, and vinyl privacy fencing built to complement your deck and define your outdoor space.

Green Ladder are fence builders in Red Deer and Central Alberta, installing cedar, pressure treated, vinyl, and composite fencing with posts set in concrete below the frost line. We design the fence to work with your deck and yard, not just run a line along the property edge.

The Problem

Alberta winters are hard on fences. Posts that were not set deep enough heave after the first freeze. Boards that were not gapped properly buckle when they absorb moisture. Gates that worked fine in October drag by April. Most fence failures start before a single board is nailed, in the post setting and base preparation that nobody sees once the fence is up.

5.0

Rated 5.0 on Google

Based on 15 reviews from Red Deer and Central Alberta homeowners. Read them on Google →

Start your project

No obligation. We will talk through the project before anything is quoted.

What You Cannot See

The Foot of Fence Nobody Ever Sees

Most of what you are paying for on a fence is underground. This is a run drawn to scale, above and below grade, with a gate post next to a line post so the difference is visible.

4 ft5 ft6 ft standard privacy heightHeavy duty hinges and latchesCap rail over everyvertical board endBoards gapped so theycan move with the seasonsEvery post set in concrete,4 to 5 feet below grade,below the frost lineHoles augered round,not dug squareGate posts get deeper footingsand heavier post stockGate postLine postFinished gradeFrost line
A fence stands or leans on the part nobody sees. Posts that stop short of the frost line heave the first hard winter, and the gate is where it shows up first, which is why the gate posts go deeper than the rest of the run.
Verified Industry Data

An Investment in How You Use Your Yard

9.7-10/10

Homeowner satisfaction (“Joy Score”)

No industry study isolates fencing specifically, but privacy and usable yard space are consistently cited by buyers as top priorities, and outdoor living upgrades as a category rank among the highest-satisfaction home investments homeowners make.

Source: National Association of REALTORS® & National Association of Landscape Professionals, 2023 Remodeling Impact Report: Outdoor Features. General North American industry data, not a guarantee for any specific property: actual results vary by home, market, and project scope.

Our Approach

Green Ladder is a Red Deer fencing company building cedar, PT wood, vinyl, and composite privacy fences across Central Alberta, with post-in-concrete footings set below frost line on every build. Every fence project starts with a site visit so we can design the style to match your deck and complement your home. The goal is one cohesive outdoor environment, not a collection of separate projects.

Post-in-Concrete Footings

Every post set in concrete below frost line. No leaning, no heaving after the first Alberta winter.

6ft Privacy Standard

Standard residential privacy fence height. Custom heights available where local bylaws permit.

Gate Hardware

Heavy-duty hinges and latches standard. Self-closing and lockable gate hardware available.

Deck Integration

Fence panels designed to tie directly into deck framing for a seamless transition between structures.

Horizontal Slat Style

Modern horizontal privacy fence panels available in cedar and composite for a contemporary look.

Acreage & Large Lots

Experience with larger perimeter fencing, paddock fencing, and rural property boundary projects.

Price Range

$4,000 - $35,000+

Based on standard residential lot perimeters. Gates and custom hardware quoted separately.

Book a Design ConsultationCall (587) 447-9009Get a price estimate →

Insured & WCB certified. Permit support where your build needs one.

How We Build It

What separates a Green Ladder build

We teach buyers what to ask, because most people don't find out what separates a strong build from a weak one until something goes wrong years later. Full structural detail reviewed at your design consultation.

01

Utility locate before any digging

We call Alberta One-Call to locate buried utilities before a single post hole is dug. Skipping this step is both dangerous and illegal, and we do it on every project as a matter of course.

02

Post holes augered round, not dug square

Every hole is augered to a clean circle. An augered hole leaves the surrounding soil undisturbed and lets the concrete bear evenly on all sides of the post. A hand-dug square hole is almost always oversized, which takes more concrete and puts less of it against solid ground.

03

Posts set below frost line

The most common fence failure in Alberta is posts that were not deep enough. Every post goes into concrete 4 to 5 feet below grade, below the frost line. This is the single most important factor in fence longevity.

04

Proper board gapping

Wood boards need room to expand and contract with moisture and temperature. We gap and space boards to accommodate movement and prevent buckling.

05

Cap rail on all vertical boards

The top of a fence board is end grain and absorbs water rapidly. A cap rail protects it. Every board-on-board fence we build gets a cap rail.

06

Gate posts set independently

Gate posts carry more load than line posts. They get deeper footings and often larger post stock to handle the lever action of a swinging gate.

07

Panel alignment to grade

Fences on sloped lots need to step or rack to grade. We plan this in the design phase so the finished fence looks intentional on your specific site.

Materials We Use

Pressure Treated Wood

ACQ-treated posts and boards. The most economical option with solid structural performance.

Western Red Cedar

Naturally rot-resistant, dimensionally stable, and beautiful. Weathers to a silver-grey or holds stain well.

Vinyl / PVC

Low-maintenance panels with aluminum post cores. No painting, no staining, no warping.

Composite Fencing

Capped composite panels that match composite deck boards for a unified material palette.

Cedar vs Vinyl vs Composite Fencing

CedarVinylComposite
Upfront costMidMid to highHighest
MaintenanceStain every 2 to 3 yearsNoneNone
Lifespan in Alberta15 to 20 years20 to 30 years25+ years
LookNatural wood grainUniform factory finishWood-look, holds colour

Every fence is built on posts set in concrete below the frost line, about 4 feet, regardless of material.

Common Questions

How much does fence installation cost in Red Deer?

Fence installation in Red Deer typically runs $40 to $100 per linear foot depending on material, height, and site complexity. Pressure-treated wood is at the lower end; composite and vinyl are higher. Gates, custom hardware, and significant grade changes are quoted separately. We provide a firm written quote before any work begins.

Do I need a permit for a fence in Red Deer?

Most residential fences under 6 feet do not require a permit in Red Deer, but setback and height rules vary by municipality across Central Alberta. We advise on your specific situation and prepare the permit package if one is required. The homeowner is the applicant.

How deep should fence posts be set in Central Alberta?

Every post goes into concrete 4 to 5 feet below grade, below the frost line for our area. Shallow posts are the single most common fence failure in Central Alberta: they heave with the first hard freeze and the whole run starts to lean. Setting posts deep and in concrete is what keeps a fence straight through decades of freeze-thaw.

How long does a fence last in Alberta?

A properly built cedar fence lasts 15 to 20 years in Central Alberta. Vinyl and composite last 25 to 30 years with essentially no maintenance. Pressure treated wood is similar to cedar. The limiting factor is almost always the posts, not the boards, which is why we set them below frost line.

Can you match my existing fence?

Often yes. We assess what you have and determine whether matching is practical. Sometimes it is better to replace the full run for a consistent look.

What is the difference between horizontal and vertical fence styles?

Horizontal slat fencing has a contemporary look and works well on modern homes. Vertical board-on-board is more traditional and offers slightly better privacy in some configurations. Both are popular across Red Deer, and we can show you each option at the design consultation.

Where We Build

Red Deer & Central Alberta

Full service area →
Red DeerLacombePonokaInnisfailBlackfaldsSylvan LakePenholdDidsburyOldsBowdenCarstairsBentleyRimbeyBashawWetaskiwinStettlerEckvilleSundreCamroseRocky Mountain House

Questions? We answer the phone.

Ready to get started?

Every project starts with a design consultation. We visit your site, design in 3D, and give you a firm proposal before any work begins.

Outdoor Project Tips & Updates

Project inspiration, building tips, and seasonal updates. One email per month.